Product Details:
|
Model: | 50 Tubes | Collector: | Vacuum Tube |
---|---|---|---|
Insulation: | Polyurethane Foam | Evacuated Tube: | Al/N/Al-SS-CC, Triple Element |
Circulation Type: | Open Loop | Outer Tank: | Stainless Steel |
Inner Tank: | Stainless Steel 316 | Bracket: | Stainless Steel 0/20/30/45 Degrees |
High Light: | photovoltaic thermal hybrid solar collector,solar thermal flat plate collectors |
50 Tubes Stainless Steel Project Solution Vacuum Tube Thermal Solar Collector with High Efficiency
Specifications
Solar collector project
certification: ISO9001,CCC,CE,Solar Keymark
solar water heater: evacuated tube
pressure type: non pressure
Working principle
1. thermosiphon solar collector works in this way:warm water rises when the phenomenon known as natural convection happens and water circulates between the collectors and tank.the tank must be installed above the collector.
2. as water in the collector is heated,it becomes lighter and naturally rises into the tank above.meanwhile,cooler water in the tank flows downwards into the collector,thus causes circulation throughout the system,these systems are reliable and relatively inexpensive.
Material
1. volume of storage tank:500L,1000L,2000L,3000L,4000L,5000L
2. non-pressurized water tank:
insulating layer,polyurethane foaming ,thickness:55mm
outer shell of tank,stainless steel ,thickness:0.4mm
inner tank,stainless steel SUS304-2B,thickness:0.5mm,normal working pressure:0.4bar,
3. dust ring gasket :ABS
4. evacuated tube:three-target tube,high boron and silicon,content 3.3,structure,gradual change SS-AL-Nx/Cu,selective absorption coating
5. frame: aluminum alloy 2mm thickness
6. controller
Advantages
1. can be operated completely automatic if connect with intelligent controller.
2. Simple structure,easy plug-in installation,can be installed both in flat and inclined roof,and can be use with an auxiliary electric booster as to provide hot water without sunshine.
3. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 50-55mm.
4. Suitable for camping area,holiday residences.
5. water introduced into vacuum tube
6. long service life,can be used as long as 15 years
Non-pressurized Solar Water Heater TECHNICAL DATA | |||||||
WATER STORAGE TANKS SPECIFICATION | |||||||
Material of out tank | High quality Painted steel/ Stainless steel. | ||||||
Material of inner tank | Food grade SUS304-2B stainless steel. | ||||||
Tank insulating layer | Imported polyurethane can conserve the heat for maximum 72 hours | ||||||
Inlet and outlet hole | Male G 1/2 | ||||||
Tank size | 420,460,470,475,480,500mm or Customer demand | ||||||
Welding: | Argon arc welding | ||||||
EVACUATED VACUUM TUBES SPECIFICATION | |||||||
Tube structure | All-glass double deck co-axial structure | ||||||
Glass material | High borosilicate 3.3 glass | ||||||
Outer tube dia. & thickness | Ø58±0.7mm; Glass thickness 1.6±0.15mm | ||||||
Inner tube dia.& thickness | Ø47±0.7mm; Glass thickness 1.6±0.15mm | ||||||
Tube size | 58*1800mm | ||||||
Absorptive coating property | Structure | AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN | |||||
Sediment method | Single target or Three targets - magnetron sputtering plating | ||||||
Specific absorption | 0.90-0.93(AM1.5) / 0.93-0.96(AM1.5) | ||||||
Emission ratio | 0.05-0.075(800C±50C) / 0.04-0.06(800C±50C) | ||||||
Solar irradiation for obtaining a preset water temperature | Φ=58 H≤4.7MJ/m² | H=4.1-4.4MJ/m² / H=3.7-4.2MJ/m² | |||||
Vacuum tightness | 5.0×10¯³ Pa | ||||||
Idle sunning property parameters | 220-260 m².C/KW / 260-300 m².C/KW | ||||||
Average heat loss coefficient | ULT=0.6~0.7W/(M2.0C) / ULT=0.4~0.6W/(M2.0C) | ||||||
Resistant Hail | ≤25mm | ||||||
Useful life | 15 years | ||||||
BRACKET | |||||||
Bracket: | Stronger galvanized steel / Stainless steel/aluminium alloy | ||||||
Bracket angle: | 0,18,22,38,45 optional, pitched roof, flat roof optional. | ||||||
Fastening pieces: | Made of zinc-coated stainless steel.. | ||||||
MODEL No. | Tube Size | Tube No. | Tank Capacity | System Capacity | Aperture Area | Volume | Load Qty 20GP/40HQ |
Dia.*L | ( m2 ) | (m3) | (sets) | ||||
PT-58-10 | 58*1800mm | 10 | 89 | 119 | 0.93 | 0.38 | 80/191 |
PT-58-12 | 58*1800mm | 12 | 105 | 141 | 1.11 | 0.45 | 67/159 |
PT-58-15 | 58*1800mm | 15 | 129 | 174 | 1.39 | 0.55 | 54/127 |
PT-58-18 | 58*1800mm | 18 | 137 | 185 | 1.67 | 0.66 | 45/106 |
PT-58-20 | 58*1800mm | 20 | 154 | 208 | 1.86 | 0.71 | 40/96 |
PT-58-24 | 58*1800mm | 24 | 203 | 275 | 2.23 | 0.85 | 33/80 |
PT-58-30 | 58*1800mm | 30 | 251 | 341 | 2.79 | 1.04 | 27/64 |
PT-58-36 | 58*1800mm | 36 | 300 | 408 | 3.34 | 1.22 | 22/53 |
Warranty:
6 years international responsibility for U pipe solar collector and 15 years for vacuum tubes due to original quality problems.
Payment term:
1. T/T 30% Deposit in advance and balance should be paid after receiving the B/L copy.
2. L/C at sight (if your quantity reaches 5*40’ HQ container)
3. Sample order or LCL: we accept western union and one touch business.
Packaging & Delivery
Packaging Details:
Export carton for full container.
Delivery Detail:
7 days after receiving the deposit.
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384