|Pipe:||Red Copper||Collector:||Flat Panel|
|Qty Of Sub-pipe:||8pcs||Header Material:||Copper TP2|
|Insulation Material:||Fiberglass||Frame Colour:||Silver|
|Absorber Coating:||Black Chrome||Frame:||Aluminum Alloy|
solar thermal collectors,
photovoltaic thermal hybrid solar collector
High Efficiency Red Copper Pipe Flat Panel Thermal Solar Collector Black Chrome Coating Absorber
Our flat plate solar thermal collector is suitable for residential or commercial solar water heating projects, such as hot water for real estate, hotel, factory hospital, school, swimming pool, central heating, floor heating, etc.
6 years international warranty for Flat Plate Solar Collector due to original quality problems.
Flat Plate Panel Solar Collector is one of the most wide-used solar collector with high efficiency.
The selective coated absorber sheet absorbs up to 95% of available sunlight converting into usable heat.
The heat is normally absorbed by water in the loop, or a freeze-resistant water mixture which is used to supplement hot water heating or house air heating.
Toughened low-iron glass (glazing) protects the absorber from the outside environment while allowing through more than 91% of sunlight.
A thick sheet of copper or aluminum plate is coated with a highly selective anodic oxidation coating that is extremely efficient at absorbing sunlight and converting it into usable heat.
The absorber sheet is ultrasonically welded to the copper riser pipes.
The insulation helps reduce heat loss from the sides and back of the collector.
High-density polyurethane and glass wool can greatly reduce weight and heat lost of the collector.
Riser & Header Pipe
Conforms to international standards, the header and riser pipes are brazed together to form a harp shaped heat exchanger that the solar system water or fluid circulates through.
The absorber sheet is ultrasonically welded to the riser pipes, thus transfers heat to the water or heat transfer fluid.
Anodized aluminum alloy sheet seals the back and frame of the panel and adds to the rigidity of the collector.
The rails in the frame are designed for easy mounting attachment.
|Efficiency Area (m2)||1.82||1.82||1.82||1.82|
|Gross Weight of Collector(kg)||47±3||55 ±3||47 ±3||55 ±3|
|Number of Cover(pc)||1||1||1||1|
|Dimension L×W(mm)||1975 × 975||1975 × 975||1975 × 975||1975 × 975|
|Cover Material||Float Glass / Low-iron Glass||Float Glass / Low-iron Glass||Float Glass / Low-iron Glass||Float Glass / Low-iron Glass|
|Dimension L×W(mm)||1840 × 956||1840 × 956||1840 × 956||1840 × 956|
|Material||Red Copper||Red Copper||Red Copper||Red Copper|
|Surface Treatment||Black Chrome||Blue Titanium||Black Chrome||Blue Titanium|
|Construction Type||Fin and Tube||Fin and Tube (Ultrasonic Welding)||Fin and Tube||Fin and Tube|
|Header Material||T2 Copper||Copper TP2||T2 Copper||Copper TP2|
|Header Tube Size(mm)||Φ25 × 1060 × 0.6 × 2pcs||Φ25 × 1060 × 0.6 × 2pcs||Φ25 × 1060 × 0.6 × 2pcs||Φ25 × 1060 × 0.6 × 2pcs|
|Rise Material||T2 Copper||Copper TP2||T2 Copper||Copper TP2|
|Rise Tube Size(mm)||Φ10 × 1886 × 0.5 × 8pcs||Φ10 × 1886 × 0.5 × 8pcs||Φ10 × 1886 × 0.5 × 8pcs||Φ10 × 1886 × 0.5 × 8pcs|
|Fill Capacity||1.8L Including Header Pipe||1.8L Including Header Pipe||1.6L Including Header Pipe||1.8L Including Header Pipe|
|Insulation Material||Rook Wool (back)||Rook Wool (back)||Rook Wool (back)||Rook Wool (back)|
|Conductivity(W/mK)||≤0.032 under 75°c||≤0.042 under 75°c||≤0.032 under 75°c||≤0.032 under 75°c|
|Frame||Aluminium alloy||Aluminium alloy||Aluminium alloy||Aluminium alloy|
|Frame Color||Bronze color||Bronze color||Bronze color||Bronze color|
|Back Plate||0.3mm Galvanized Steel||0.3mm Galvanized Steel||0.5mm Galvanized Steel||0.5mm Galvanized Steel|
|Max Operation Temperature||180°c||200°c||180°c||200°c|
|Limitation of Operation|
|Recommended Circulation Flow||Water||Propylene glycol&water mixture||Water||Propylene glycol&water mixture|
|Resistance to Freezing||≥0°c||≥-40°c||≥0°c|
Technical support: We offer design and installation instruction with 10 years installation experience.
OEM: Your LOGO information can be made on our Flat Plate Panel Solar Collector and carton boxes.
Packaging & Shipping
Packaging Details: Export strong corrugated carton outside with foam protection inside.
Delivery Time: 10 - 15 days for container order quantity upon confirmed invoice or sales contract.
--Fast response: Your inquiry will be replied within 24 hours via e-mail or online messenger;
--Technical support: You have more than 10 years experience for product research, installation guidance, market analysis, etc.
--OEM & ODM: We welcome OEM & ODM requirements for solar collector, storage tank, installation frame, and even for some out-sourcing equipment;
--Sample checking: In spite of quality control in production, samples will be selected and installed to check prior to delivery;
--Minimum order quantity: We offer sample sample manufacturing for customers to check the quality and service;
--Shipping service: We offer to arrange goods shipment to abroad ocean port or inland site, and if necessary to make goods insurance, customs clearance, etc;
--Import certificates: We offer to make Certificate Origin CO, FORM A, FORM E, FORM F, customs certification, etc.
Contact Person: Passionsolar