|Structure:||Split||Accessories:||P/T Valve, Safety Valve, Magnesium Rod, Electrical Heater, Controller|
|Collector:||Stainless Steel Reflector Solar Collector||Outer Tank:||Colored Steel|
|Inner Tank:||Stainless Steel 316||Bracket:||Stainless Steel 0/20/30/45 Degrees|
residential solar water heater,
split pressurized solar water heater
CE High Efficiency Split Solar Water Heater with Stainless Steel Reflector Solar Collector
separate pressurized solar water heater,heat pipe system,collector with solar keymark certificated,tank can put in any room.
Separate pressurized solar water heater
Use copper tube as its flow material, conducted by thermal conductivity medium and vacuum tube does not take water, operating under the pressure.
Use high-strength galvanized steel for outside shell with mold-sprayed treatment.
There equipped with standard electric heating devices and automatic temperature control device for the insulation tube.
As well as magnesium anode rode, which effectively prevent encrustation and keep good insulation effective.
1. Collector separates with the storage water tank, which can be installed anywhere of the house.
2. The collector can be put on the inclined roof / flat roof/flat place.
3. Anti-freeze, no water inside the tubes when it works.
4. Intelligent controller. The system is equipped with the automatic procedure and electric heating system to supplement heat.
5. Workable at anytime.
6. Wide application, the whole heat collecting project can meet not only hot water requirement but also can be used for many other industry, warming, swimming heater fields.
Detailed Product Description
1) The pipeline is made of red copper and conducted by heat transfer medium liquid.
Water can't flow in the vacuum tubes and is operated when confined.
the crust uses aluminum alloy mold material of high strength with airflow design.
2) Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent fervent furring.
3) The insulating layer uses polyurethane bulk bubble and has a good effect of temperature preservation
4) The product successfully carries out the instthe instthe instahe installation of separation according to fabricating yard and is harmoniously blended with architecture
5) The equipment of separated solar water heater is composed by heat collector, storage tank, electric control device, hot water mix unit and fittings for circulation and installation
The detailed description
|Inner tank material||SUS304-2B stainless steel with 1.0-2.0mm thickness|
|Outer tank material||color steel with 0.5mm thickness or stainless steel with 0.5mm|
|Vacuun tube material||borosilicate glass 3.3; three target (CU-SS-AL)absorb coating|
|Insulation material||50-60mm foaming polyurethane|
|Frame material||aluminium alloy|
|Reflector material||aluminium or stainless steel|
|Optional electrical heater||1.5~3.0KW|
Technical Data of Heat pipe collector
|Numbers of tube(pcs)||30||20|
|Absorber area approx.(m2)||2.439||1.626|
|Hydraulic Connections||G3/4" male thread|
|Packages each unit (cartons)||tubes:3ctns manifold:1ctn||tubes:2ctns manifold:1ctn|
|Loading qty in 20 GP/40GP/40HQ||63/130/145||90/185/210|
|Min. volume flow rate per collector(L/H)||108||72|
|Rated volume flow rate per collector.(L/H)||180||120|
|Max. volume flow rate per collector(L/H)||1200||1200|
|Maximum operation pressure(Bar)||6|
|Heat transfer fluid||Anti-freeze Fluid (Water-Glycol)|
|Max. working temp.( ºC)||250|
|Medium||Pure water, or anti-freeze liquid|
|Start-up Temperature of heat pipe||<= 30°C|
|Flow type||Heat pipe|
|Heat pipe material||copper|
|Heat pipe size||Top: Ø14*1mm;Body: Ø8*0.75mm|
|Tube diameter||φ58/ 1800mm|
|Solar vacuum glass tube||High boron-silicon|
|Coating of absorber on glass tube||Al-N-Al, Copper, Stainless steel|
|fins around heat pipe||single long Aluminum(1.68m)|
|Manifold pipe material||copper (Ø35x1.0mm)|
|Manifold casing material||Aluminum alloy frame(2.5mm)|
|Insulation material in manifold case||Glass fiber|
|Thickness of insulation(mm)||45|
|Density of insulation (kg/m3)||90|
|Frame material||Aluminum alloy frame(2.0mm)|
|Frame and manifold case finish||Black Powder coated|
1) Selling package: all export carton.
2) Transport package: Samples use the wooden box, other use the export cartons.
3) Shipping: Small LCL and high value suggest the air transport . FCL use the sea voyage.
1) We offer customers 5 years for whole solar systems.
2) Carton design for customs is free offered when goods sent by container.
3) When you have any questions regarding our products, feel free to contact us. We will be very glad to service for you.
It's hoped that our solar system can save you more money as well as protect our environment.
Contact Person: Passionsolar