|Structure:||Split||Heat Exchanger:||Copper Coil|
|Outer Tank:||Colored Steel||Inner Tank:||Stainless Steel|
|Bracket:||Black||Heat Preservation:||72 Hours|
residential solar water heater,
split pressurized solar water heater
500L High Efficiency Heat Pipe Split Solar Water Heater With Copper Coil Stainless Steel Inner Tank
Split pressure solar water heater system
1. Capacity: 50-20000L
2. CE, SRCC, Solar keymark
3. High efficiency
Split pressure solar water heater system
1. This kind of products use Evacuated Tubular Solar Thermal Collector Tube with Heat Pipe as its heat-absorb element. So it can be connected to the pressurized system.
2. These solar panel heat collectors are suitable for heating domestic hot water, swimming pools etc.
3. One unit is adequate for an average household (3-4people).
4. It is modular, so you can add more if required.
5. A single panel is sufficient for a 200litre cylinder, but you can fit 2 or more for high water usage, or for heating swimming pools or underfloor heating.
6. Some types of renewable energy are only available in certain locations.
7. However free solar heating is potentially available to almost every house in the world.
Pressurized Solar water heaters /Solar Collector - Swimming Pool (SRCC/Solar Keymark)
Solar water heater/Solar Collector
1) High efficiency solar collector using heat pipe evacuated tubes.
2) Able to be used in all climates.
3) Reliable and efficient with twin-glass solar tubes.
4) Copper heat pipes for rapid heat transfer.
5) Easy plug-in installation for mounting on the roof or at ground level.
6) Maintenance free.
7) Suitable for mains pressure water (up to 6bar / 87psi).
8) Corrosion resistant silver brazed copper header.
9) Frame material: SS / AL / Black coating
10) Collectors may be connected in series to increase water heating capacity.
11) Tubes easily replaced if broken - can be used with broken tubes.
12) Ideal for commercial solar water heating applications.
|Heat Pipe||TU1 red copper pipe 14/ 24MM condenser|
|Glass Tube||Three-target Cu/SS-AIN coating vacuum tube|
|Manifold||Copper pipe header, rock wool & PU insulation, aluminum casing|
|Bracket||Anodized strong aluminum alloy designed for slope & flat roof|
|Inner tank||Food-grade stainless steel SUS304-2B / SUS316|
|Exchanger||Copper / Stainless coil firmly fixed in storage tank|
|Insulation||High-density PU foam with 80 hours heat preservation|
|Tank shell||Painted color steel ( stainless steel shell is available )|
|Accessories||Electrical heater, Magnesium anode, T/P valve, Check valve|
|Pump Station||Including solar controller, circulation pump, expansion tank, safety valves & fittings|
|Collector Angle||20° ~ 90°|
|Anti-freezing||- 40 °C|
|Hail Resistance||Φ25 mm|
|Working Pressure||6.0 Bar|
|Model||Heat Pipe Solar Collector||
|Tube Size||Collector PCS||20GP||40HQ|
|PT-H12-100||Φ58*1800MM||12 Tube * 1 PC||100 L||1500W||52||117|
|PT-H18-150||18 Tube * 1 PC||150 L||1500W||38||89|
|PT-H24-200||24 Tube * 1 PC||200 L||1500W||31||73|
|PT-H30-250||30 Tube * 1 PC||250 L||1500W||26||60|
|PT-H36-300||18 Tube * 2 PCS||300 L||1500W||21||50|
|PT-H48-400||24 Tube * 2 PCS||400 L||3000W||17||41|
|PT-H60-500||30 Tube * 2 PCS||500 L||3000W||14||33|
|PT-H72-600||24 Tube * 3 PCS||600 L||3000W||12||29|
|PT-H80-700||20 Tube * 4 PCS||700 L||3000W||10||24|
|PT-H96-800||24 Tube * 4 PCS||800 L||3000W||8||19|
|PT-H120-1000||30 Tube * 4 PCS||1000 L||3000W||7||16|
Solar Water Heater with heat pipe
1. Wash process
They never have the chemical wash process.So the inside of heat pipe has impurity that will influence the heat exchange.
2. Structure of the end
The structure of our tube end is special taper, which can resist freezing. Their end of tube is quite different.
3. Welding method
We use silver welding between the top and tube body, so the connection part is argent. As they use normal welding, this part is black. Silver welding can make sure the top won't leak air after long time thermal impact.
4. Special liquid
The liquid inside of the tube is extremely different, but it's difficult to see. Our liquid is patent products, with high efficiency, without poison to people. It can keep the tube working with high efficiency for 15 years. But usually, their liquid has low efficiency and disappear very quick, usually one year later you will find the tube's efficiency has been reduced a lot!
5. The outlook
The sharp of the whole tube(especially the top and the end) is quite different with ours. I will send a picture of heat pipe for you. With the picture, it's easy to express.
1) The angle of the frame can be changed in production according to the local latitude condition of the customers. We can design the suitable angle for the customers
2) We offer the spare accessories and tubes for your order for free
3) We can offer the standing frame for SFB if the customers need
4) We can change the quantity of tubes of each SFB solar collector according to customers' request
5) We can change the different material of manifold according to the requirement of customers , SFB with standing frame.
Evacuated Tube Solar Water Heater: standard export package.
The samples are loaded into the plywood boxes.
We defines an OEM (Original Equipment Manufacturer) as an entity or organization that integrates a customized or embedded the product in its own unique solution for sale to its customers.
The proof of this concept is that the product must be significantly transformed.
The OEM Partner primarily uses its own company logo and brand name on its solution and it markets, sells and provides technical and warranty support directly to its customers.
Payment terms: T/T, L/C, Paypal, Western union all support.
Delivery time: Sample order 3 working days, Container order 10 working days.
Minimum order quantity: 1 PC
Guarantee period: 8 years
OEM service: Support (Print logo on carton for free)
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384