|Outer Tank:||Colored Steel/Stainless Steel||Inner Tank:||SUS304 2B|
|Insulation Layer:||High Presure Polyurathane Foaming||Bracket:||Galvanized Steel With Plastic Coated|
|Circulation Type:||Indirect / Closed Loop (Active)||Working Pressure:||0.6Mpa|
|Testing Pressure:||1Mpa||Heating System:||Batch / ICS (Passive)|
residential solar water heater,
high pressure solar water heater
The split solar water heater is an active system,
because it uses a pump with a controller to circulate the fluid in the system.
Storage thank and solar panel collector are separate, while the collector is integrated in to the roof of the building,the tank and the pump station can be installed anywhere of the building.
The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems.
This system is especially suitable for cold area, even-35 celsius degrees.
Now ,the split solar water heater is more and more popular in the world.
1.When the temperature of the panel collector reaches the set valve, the controller shall start the circulation pump automatically.
2.The circulation pump makes heat-conducting liquid circulate automatically.
3.The heat-conducting liquid transfer heat to water by the heat exchanger in the water tank. 4.In case the temperature of the collector dose not reach the set valve, the circulation pump shall be shut automatically 5.In case the temperature of the water tank dose not reach T-max, then start the auxiliary heating device.
Specification of flat plate solar collector:
1) Low iron textured tempered glass(3.2mm thickness)offers the best capability of durability, strength.
2) Tinox blue titanium or black chrome coating have very high absoption rate to ensure the high efficiency.
3) Whole-plate ultrasonic welding technology makes the flate plate solar collector more beautiful, efficient and durable.
4) Special Anodized aluminum alloy frame to ensure handsome appearance and can accept high pressure without leakage.
|Split Pressurized Solar Water Heater (With two coils) - Blue Titanium Flat Panel|
|Flat Panel Solar Collector||Core material||Copper|
|Coating||Copper aluminum cover coating of Blue Titanium Absorption rate: α=0.95 Reflection rate ε=0.04.|
|Base plate||Marine-grade H3004 Aluminum, toughnessH32 Thickness 0.7mm|
|Glass of panel||Special glass for panel With ANS1297-1-1975, BS6206A and JIS R3206 standards; toughness with AS2208-1978 and federal standards of United States.|
|Panel Insulation||Bottom with fiberglass insulation ,Thickness 60mm,Density 20kg/m³; Side-thickness insulation:13mm; Density 23kg/m³; Thermal properties: R1.0 Thermal conductivity : 0.059W/m．|
|Top Copper Coil (mm*M)||Φ12*15||Φ12*15||Φ12*15||Φ12*15||Φ12*15||Φ12*15||Φ12*20|
|Bottom Copper Coil (mm*M)||Φ12*15||Φ12*15||Φ12*15||Φ12*15||Φ12*15||Φ12*25||Φ12*30|
|Polyurethane Foaming (mm)||55||55||50||50||50||60||60|
|Outer Tank||Color Steel Plate/ Enamal White|
|Inner Tank||SUS 304 2B , Working pressure-6 bar, Test pressure-12 bar|
|Working Station||SR961S (Including controler & WILO PUMP)|
Contact Person: Passionsolar