|Capacity:||100L/150L/200L/250L/300L||Working Pressure:||6 Bar|
|Glass:||Tempered Woven Low Iron Tempered Woven Glass||Accessories:||P/T Valve, Safety Valve, Magnesium Rod, Electrical Heater, Controller|
|Outer Tank:||Color Steel||Inner Tank:||Stainless Steel 304/316L|
|Bracket:||Stainless Steel 304 0/20/30/45 Degrees||Collector:||Flat Plate|
flat panel solar water heater,
rooftop solar water heater
Blue Film Water Heating System For Home , Blue Titanium Flat Panel Solar Collector
Detailed Product Description
Flat-plate collectors are the most common solar collectors for use in solar water-heating systems in homes and in solar space heating.
A flat-plate collector consists basically of an insulated metal box with a glass or plastic cover (the glazing) and a dark-colored absorber plate.
Solar radiation is absorbed by the absorber plate and transferred to a fluid that circulates through the collector in tubes.
In an air-based collector the circulating fluid is air, whereas in a liquid-based collector it is usually water.
Flat-plate collectors heat the circulating fluid to a temperature considerably less than that of the boiling point of water and are best suited to applications where the demand temperature is 30-70°C (86-158°F) and/or for applications that require heat during the winter months.
Flat collectors can be mounted in a variety of ways, depending on the type of building, application, and size of collector. Options include mounting on a roof, in the roof itself, or free-standing.
Specification of Flat plate panel
|Cross area m2||2||2|
|Absorber area m2||1.8||1.8|
|Conversion factor %||78.5||79.8|
|Loss coefficient a1 w/m2k||4.02||3.65|
|Loss coefficient a2 w/m2k 2||0.0078||0.0065|
|Fluid content L||2.22||2.22|
|Maximum operating pressure MPA||1||1|
|Temperature of operation °C||(-)35~150||(-)35~150|
|Weight empty KG||32||33|
|Core||All copper, ultrasonic welding|
|Coating||Highly selective titanium-coating(from Gemany)|
|Absorber material & thickness||Copper T2, δ=0.15mm|
Header pipe material
Dimension & quantity
|Copper T2, ø22*0.7/ø25*0.6*1060mm, 2pcs|
Riser pipe material
Dimension & quantity
|Copper T2, ø10*0.5mm, 8pcs|
|Material & thickness of glass||
Normal glass:4mm/tempered glass:4mm
Rhombic tempered glass:4mm/low iron rhombic tempered glass: 3.2mm
|Dimension of glass sheet mm||1988x988|
|Transmittance of glass||87%~91%|
|Material & thickness of the frame||Aluminum, δ=0.8mm||Aluminum, δ=0.9mm|
|Color of the frame||champagne||Bronze-colored|
|Insulation material mm||Glass wool, PE Foam/glass wool, high dense polyurethane foam|
|Material & thickness of the back sheet||Zincification plate:0.3mm/embosseo aluminum back sheet: 0.3mm|
|Cover sealing material||Metal/EPDM+metal|
(2 pieces in 1 carton) mm
Specification of flat plate solar water heater
|capacity||Panel size||Panel qty||20GP||40GP||40HQ|
Solar water heater
1) Header pipe: copper pipe , Absorbing fin:Aluminum or copper
2) Outer tank shell:colored steel or stainless steel ,
3) Inner tank : stainless steel 3042B or 316,100L-350L
4) Insulation: by polyurethane Thickness:55-65mm
5) Rubber Seals and Rings: UV stabilized high temperature silicon rubber
6) Optimal installation angle: 20-80 degree
7) Inlet & Outlet: 1/2” or 3/4”
1. 6 years warranty.
2. Excellent after-sale.
3. Sample and bulk orders are available.
4. Fast response within 12 hours and less.
5. OEM/ODM are welcome.
Contact Person: Passionsolar