|Tubes:||15 Tubes||Insulation:||Rock Wool|
|Housing Material:||Aluminum Alloy||Installation:||Sloped Roof|
|Heat Pipe:||14mm Condenser Copper||Manifold Color:||Black Coating|
|Angle Of Bracket:||45 Degree||Application:||Residential Heating|
pressurized solar collector,
solar hot water collector
15 Tubes Black Coating Heat Pipe Solar Collector For Residential Heating Sloped Roof
Compact pressurized heat pipe solar water heater
This kind of products use Evacuated Tubular Solar Thermal Collector Tube with Heat Pipe as its heat-absorb element.
So it can be connected to the pressurized system.
These top-of-the-range solar panel heat collectors are suitable for heating domestic hot water, swimming pools etc - even in winter.
One unit is adequate for an average household (3-4people), and it is modular, so you can add more if required.
A single panel is sufficient for a 200litre cylinder, but you can fit 2 or more for high water usage, or for heating swimming pools or underfloor heating.
Some types of renewable energy are only available in certain locations, however free solar heating is potentially available to almost every house in the world! "
Pressurized Solar water heaters /Solar Collector - Swimming Pool (SRCC/Solar Keymark)
Solar water heater/Solar Collector Feature:
1) High efficiency solar collector using heat pipe evacuated tubes.
2) Able to be used in all climates.
3) Reliable and efficient with twin-glass solar tubes.
4) Copper heat pipes for rapid heat transfer.
5) Easy plug-in installation for mounting on the roof or at ground level.
6) Maintenance free.
7) Suitable for mains pressure water (up to 6bar / 87psi).
8) Corrosion resistant silver brazed copper header.
9) Frame material: SS / AL / Black coating
10) Collectors may be connected in series to increase water heating capacity.
11) Tubes easily replaced if broken - can be used with broken tubes.
12) Ideal for commercial solar water heating applications
Solar Water Heater with heat pipe
They never have the chemical wash process.So the inside of heat pipe has impurity that will influence the heat exchange.
2.Structure of the end:
The structure of our tube end is special taper, which can resist freezing. Their end of tube is quite different.
We use silver welding between the top and tube body, so the connection part is argent. As they use normal welding, this part is black. Silver welding can make sure the top won't leak air after long time thermal impact.
The liquid inside of the tube is extremely different, but it's difficult to see. Our liquid is patent products, with high efficiency, without poison to people. It can keep the tube working with high efficiency for 15 years. But usually, their liquid has low efficiency and disappear very quick, usually one year later you will find the tube's efficiency has been reduced a lot!
The sharp of the whole tube(especially the top and the end) is quite different with ours. I will send a picture of heat pipe for you. With the picture, it's easy to express.
1. The angle of the frame can be changed in production according to the local latitude condition of the customers.
We can design the suitable angle for the customers.
2. We offer the spare accessories and tubes for your order for free
3. We can offer the standing frame if the customers need
4. We can change the quality of tubes of each solar collector according to customers' request
5. We can change the different material of manifold according to the requirement of customers , with standing frame.
Payment terms: T/T, L/C, Paypal, Western union all support
Delivery time: Sample order 3 working days, Container order 10 working days.
Minimum order quantity : 1 PC
Guarantee period: 6 years
OEM service: Support (Print logo on carton for free)
|Size (mm)||Φ58*1800 / Φ47*1500|
|Tubes (pcs)||12 / 15 / 18 / 20 / 24 / 30|
|Glass tube||Vacuum Tube with three-target coating Cu-SS-ALN/AIN|
|Heat pipe||TU1 copper pipe, condenser Φ14mm/ Φ24mm, body Φ8mm|
|Heat conductor||Shaped aluminum wrapping tightly contact copper heat pipe|
|Manifold||Manifold header||TP2 copper diameter 35mm (larger size is available)|
|Manifold shell||Anodized aluminum alloy|
|Insulation||High-temperature resisting fiberglass plus high-density PU foam|
|Seals||High-temperature resisting silicon seal|
|Bracket||Material||Shaped strong aluminum alloy adaptable to flat & slope roof|
|Tube holder||Anti-aging UV stabilized nylon|
|Heat Carrier||Distilled water / Anti-freezing propylene glycol and water mixture|
|Connection||Φ22mm copper (1 inch male threaded size is available)|
|Hail Resistance||Φ25mm diameter|
|Collector Angle||20 ~ 90°|
|Test Pressure||12.0 bar|
|Working Pressure||6.0 bar|
Contact Person: Passionsolar