|Collector Tubes:||30 Tubes||Insulation:||High Pressure Polyurethane|
|Bracket:||Aluminum Alloy||Assembly:||Flat Roof|
|Heat Pipe:||24mm Condenser Copper||Manifold Color:||Black|
|Angle Of Bracket:||20 Degree||Application:||Solar Water Heating|
heat pipe vacuum tube solar collector,
solar hot water collector
Flat Roof High Powered Solar Water Heating System Heat Pipe Solar Collector 30 Tubes
Evacuated tube heat pipe solar collector, one of our main products, is widely used in Europe, USA, Canada.......
How does it work?
This system is consists of heat pipe vacuum tube, collector manifold & frame.
There is a heat pipe inside evacuated tube, and condensor is plugged into manifold.
Heat energy will be transfered to manifold by heat pipe as soon as the evacuated tubes gets sunshine.
In this way, the system starts circulation.
So it is called pressure solar collector too.
|Collector inner manifold||Material||Copper runner|
|Collector outer manifold||Material||Aluminum alloy|
|Evacuated Tube||Type||Three- target evacuated heat pipe|
|Collector Stand||Material||Aluminum alloy|
|Spare parts||Connection||Copper connection|
|Thermally Conductive Silicone||Included|
1. Solar radiation is absorbed by the solar tubes and converted into heat.
Heat pipes conduct the heat from within the copper tube up to the header pip
2. Anti-freeze liquid is circulated through the header.
3. No water inside the evacuated tubes, so the tubes will not break in the winter, suitable for Russia, USA, Finland.....
4. Pressure solar collector can be still work if some tube broken.
5. If you equip with a tank, water tank does not need to be installed above the solar collector.
6. It can be installed both on pitched roof and flat roof.
|Model-tubes||Number of tubes||Absorb area|
|PT 12-58/1800||12 tubes(heat pipe)||1.56m²|
|PT 15-58/1800||15 tubes(heat pipe)||1.95m²|
|PT 20-58/1800||20 tubes(heat pipe)||2.60m²|
|PT 25-58/1800||25 tubes(heat pipe)||3.25m²|
|PT 30-58/1800||30 tubes(heat pipe)||3.90m²|
|PT 36-58/1800||36 tubes(heat pipe)||4.68m²|
Heat pipe evacuated tube is a sealed copper pipe containing a small quantity of volatile liquid and some special additives but with no air.
Heat pipe tube consists of glass vacuum tube and a copper heat pipe which is fixed by aluminum fin and silicon rubber.
When copper heat pipe to be heated then it will conduct heat to its tip(condenser) which is plugged into the header pipe (inside of manifold).
Water run through the header pipe so that heat is transferred from the heat pipe condenser to the water.
We can have different tubes for each collector, from 8 tubes to 30 tubes.
Size & Weight & Load
|Size (m3)||Manifold & stand||0.061||0.061||0.061||0.061||0.061||0.072|
|Weight(kg)||Manifold & stand||11||14||15.5||17||24||31|
Warranty & Service
Warranty: 6 years
If some problem happens which is relative to our quality, we are absolutely responsible for it.
Contact with us at anytime, we will solve it in time.
PDF Catalogue of Heat Pipe Solar Collector.
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384