|
Product Details:
|
| Capacity: | 200L | Working Pressure: | 0.5 Bar |
|---|---|---|---|
| Structure: | Compacted | Type: | Non Pressurized |
| Outer Tank: | Painted Steel | Inner Tank: | Stainless Steel 316 |
| Tube: | Vacuum Tube | Heat Preservation: | 3 Days |
| High Light: | low pressure solar water heater,solar roof water heater |
||
200L Industrial Thermosiphon Compacted Non Pressurized Vacuum Tube Solar Water Heater
Working Principle:
Because of the larger proportion of hot water than cold water, cold water flows downward and hot water goes upward.
The water will be heated continuous between water tank and vacuum tube.
In other words, hot water always floats on cold water.
The hot-water flows to the water tank from the vacuum tubes.
Because of the proportion, cold water flows to vacuum tubes from the water tank.
The cold water is heated in vacuum tubes.
After it becomes hot water, it flows to water tank again.
The water circulates constantly between water tank and vacuum tubes.
The cold water in water tank will be hotter and hotter.
Finally, all cold water will be heated to be hot water. This is the heating course of cold water.
Description:
Non-pressurized solar water heater is such a most economical system with high efficiency at the same time.
It works depending on the gravity of water, so it's much better to be installed on the slope or flat roof as top as possible to get enough hydraulic pressure for shower.
A simple assistant tank can be equipped for tap water refill automatically or with an intelligent controller to control the auxiliary heating device and water refill at the same time.
| Vacuum Tube | Size (mm) | Φ47*1500 / Φ58*1800 | |||||
| Tube (pcs) | 18 / 20 / 22 / 24 / 30 | ||||||
| Material | Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
| Coating | AL/AL-ALN(H)/AL-ALN(L)/ALN or Cu/SS-ALN(H)/SS-ALN(L)/ALN | ||||||
| Water Tank | Capacity | 100L ~ 300L for hot water storage tank | |||||
| Inner tank | Food-grade stainless steel SUS304-2B / SUS316 | ||||||
| Insulation | High-density polyurethane foam with 70~80 hours heat preservation | ||||||
| Tank shell | Painted color steel | ||||||
| Bracket | Shaped galvanized steel structure up to 140 km/hour wind resistance | ||||||
| Accessories | Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
| Auxiliary Equipment | Anti-aging silicon seals, Dust-proof seals, Air-vent cap, Stainless screws | ||||||
| Tilt Angle | 25 ~ 50° | ||||||
| Water Output | 45 - 95°C | ||||||
| Hail Resistance | Φ25mm | ||||||
| Working Pressure | 6.0 bar | ||||||
| Model Number | Solar Vacuum Tube | Tank | System | Container Loading Qty /sets | |||
| Size /mm | Qty /pcs | Liter | Liter | 20GP | 40GP | 40HQ | |
| 460-1800/58-18 | Φ58mm*1800 | 18 | 150 | 198 | 43 | 86 | 105 |
| 460-1800/58-20 | 20 | 170 | 223 | 40 | 80 | 97 | |
| 460-1800/58-24 | 24 | 200 | 263 | 35 | 70 | 85 | |
| 460-1800/58-30 | 30 | 250 | 329 | 28 | 56 | 68 | |
| 460-1800/58-36 | 36 | 300 | 395 | 23 | 47 | 57 | |
Accessories:
Stainless bolts & nuts, water-proof silicon rubber, anti-aging dust-proof rubber seal, plastic pipe holder and ventilating cap to ensure their lives as long as other parts of the system
Optional Devices:
Assistant tank, automatically feed tap water into storage tank to keep it sufficient always
Electrical heater, as an auxiliary heating element in case of raining or cloudy days so as to ensure a continuous hot water supply
Intelligent controller, automatically controls water refill and switch on the auxiliary heating device, more intelligent system operation.
Warranty:
6 years international responsibility for integrated system exchange and 15 years for glass vacuum tube compensation due to original quality problems
PDF Catalogue of Integrative Non Pressurized Solar Water Heater.
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384
