|Frame Colour:||Black||Work Pressure:||0.6Mpa|
|Cover Material:||Low Iron Tempered Textured Glass||Insulation Material:||Fiberglass|
|Bracket:||Aluminum Alloy||Using:||Large Heating Project|
|Absorber Coating:||Blue Film||Welding:||Ultrasonic Welding|
solar water heater collector,
solar panel collector
CE Blue Film Flat Plate Collector For Hotel Heating System , Swimming Pools
Copper Pipe Flat Collector
1. Pressurized collectors
2. Affordable solar heaters
3. Suit for hot area
4. Domestic systems
1. Safe and steady
Flat plate solar collector uses all cooper fluid tube;
System operating is steady; components are not easy to be damaged;
2. Pressurized operating
Working pressure is 0.6Mpa; designed pressure is 1.2Mpa;
the hot water is forced to stream out from the top; it is convenient to use.
3. High heat efficiency
Absorbing coating of the collector is black chrome and blue sputtering;
absorbing rate is 92-96%, and emission rate is 5%-15%; heat efficiency is high.
4. Good temperature preservation
Thickness illustration layer is 50mm; constant temperature high pressure quantitative foam;
less than 5 Celsius Degree per 24.
5. Long using life
Inner tank is 1.2-2.0mm stainless steel; resist high temperature and corrosion; 15 years using life.
6. Several models fulfill different user need
According to customers’ requirement, we put our several modes with different specifications to suit flatlet, villa, hotel and factories. , etc
7. Easy installation
Copper Pipe Flat Plate Solar Collectors
The copper Pipe Flat Plate Solar Collectors is a tank of roof-mounted system,using the thermosiphon principle to transfer heat from collector to water inside tank.
The thermosiphon coating:selective absorb coating and hot water rises.
The collectors are coated with a heat-absorbent surface which absorbs the sun rays and heats the fluid in the collector.
As the fluid heated,it rise the top of the collector panel and into the tank where it displaces cooler fluid which flows in to the bottom of the collector panel where the process is repeated.
The more temperature difference between the fluid in the collector panel and water in the tank, the faster flowing and heat exchanging.
|Fin material||Aluminum alloy|
|plate||Coating layer||Blue titanium|
|insulation layer||Glass wool|
|flowing tube||Aluminum-copper Φ10x0.6 mm,NO.:8pcs|
|solar||Header tube||copper Φ22x0.6 mm|
|Cover||material||Low iron tempered glass|
|Border frame||Aluminum alloy|
|collector||Back sheet||Galvanized steel ,thickness:0.4mm|
|seal ring||metal elasticity anti-aging water proof|
|Working temperature||Minus 35 degree Celsius to 150 degree Celsius|
Packaging & Shipping
Thermosyphon Solar Water Heaters are put into cartons firstly.
The samples are loaded into the plywood boxes.
For the FCL goods, cartons can be loaded into the container directly from solar water heater manufacturer.
10 years international responsibility for Flat Plate Panel Solar Collector due to original quality problems.
1. The angle of the frame can be changed in the production as the virtual geographical condition of the customers.
2. We can design the suitable angle for the customers.
3. We offer the spare accessories and tubes for your order for free.
4. We can offer the different material of water tank , frame , and tubes according to your request.
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384