|Use:||Hot Water Heating||Accessories:||P/T Valve, Safety Valve, Magnesium Rod, Electrical Heater, Controller|
|Outer Tank:||Colored Steel||Inner Tank:||Stainless Steel|
|Bracket:||Galvanized Steel 0/20/30/45 Degrees||Coating:||Blue Titanium|
flat panel solar water heater,
rooftop solar water heater
Blue Titanium Collector Flat Plate Solar Water Heater , Solar Powered Pool Heater
|Total area of collector||2 M2|
|Daylighting area||1.85 M2|
|Absorbing area||1.85 M2|
|Material of cover glass/ thickness(mm)||float glass/toughened glass/low-iron ultra white tempered patterned glass/4.0mm|
|Pipe port material /size||complete copper / Φ25x950mm|
|Pipe material/size||complete copper / Φ10x1950mm|
|Number of riser pipe||7 / 8 / 9bars|
|Operation pressure||1.0 Mpa|
|Test pressure||1.6 Mpa|
|Insulation materials /thickness||high-density fiberglass board/3050mm|
|Back sheet||0.3mm galvanized steel plate or 0.5mm embossed alumimum plate|
|Material of frame / thickness||Anodized aluminium alloy(silver and black color) / 70/80/90mm|
|Material of bracket||stainless steel/galvanized steel/aluminium alloy|
1. 10 years warranty!
3. Sample offer!
4. can bear pressure
5. connect with tap water.
Working Principle of Flat Plate Solar Water Heater
Sunlight passes through the glazing and strikes the absorber plate, which heats up, changing solar energy into heat energy. The heat is transferred to liquid passing through pipes attached to the absorber plate.
Absorber plates are commonly painted with "selective coatings".
Absorber plates are usually made of copper or aluminum because the metal is a good heat conductor.
Copper is more expensive, but is a better conductor and less prone to corrosion than aluminum.
Water Tank Details:
Inner tank material: SUS304-2B stainless steel 1.5mm thickness,food grade,innocuity.
Outer tank material: color steel 0.35mm thickness,antirust.
Insulation layer: High density polyurethane foaming, 50mm thickness.
Water tank capacity:300L
Bracket material: galvanized steel,1.5mm thickness.
The glistening obliquity: 45 degree
Hail resistance: 25mm.
Wind stress: 180km/h
Heat preservation: 72Hours.
Usually, it is 10 Working days after receiving deposit or original L/C.
- Can you provide FREE SAMPLES?
Sorry,you have to pay it first,but we'll cut the costs in your next order(20GP).
- Can you accept OED/ODM?
Yes,we can paint the logo on the product and package if you need,it is free for containers.
- What is your GUARANTEE TIME?
10 years for vacuum tubes,5 years for frame,3 years for water tank,1 year for other parts.
- What is your PAYMENT TERM?
T/T , L/C
- Do you have other ADDITIONAL SERVICE?
We provide free spares according to your order, such as vacuum tubes,tube holders,dust rings,
seal rings,screws etc.
Also,we can provide logo design free if you have an order at least 20 feet container.
Contact Person: Passionsolar