|
Product Details:
|
| Capacity: | 50 Tubes | Working Pressure: | 0.5 Bar |
|---|---|---|---|
| Warranty: | 6 Years | Collector: | Vacuum Tube |
| Hail Resistance: | 25mm | Manifold: | Stainless Steel 304 – BA |
| Inner Tank: | Stainless Steel 316L | Glass Tube: | Three Layers |
| High Light: | vacuum tube hot water solar collector,solar evacuated tube collectors |
||
50tubes Stainless Steel Project Vacuum Tube Solar Collector High Efficiency Bigger Manifold
Specifications
1. inner tank adopt SUS304-2B,thickness 1.5mm, Withstand pressure of 0.6 Mpa;
2. outer tank:SUS-201 stainless steel, thickness: 0.31mm.
3. bracket: SUS-201 stainless steel, thickness: 1.2mm.
4. vacuum tube: AL-SS/CU with heat pipe.
5. insulation layer: 55mm polyurethane.
6. angle: we will adjust it according to different countries' latitude.
Primary competitive advantage
1) CE, CCC, ISO9001 approval.
2) Price.
3) Prompt delivery.
4) Environmental protection.
5) Small order and OEM order accepted.
Working principle
1. The design of this type solar collector use the all-glass three targets vacuum tubes as the heat-absorb element.
2. The high vacuum degree of the clearance between the outer and inner tube can reduce the heat emission which caused by convection and conduction to a very low level.
3. All-glass evacuated tube transfers sun energy into heat energy by the high absorption rate and low emittance rate of layer films (Cu/Al/SS).
4. Depend on thermo-siphon principle, the different density between the hot water and the cold water, a cycle can be created in the tube which hot water ascending and cold water descending status.
5. Keeping natural circulation like this, the water in the manifold will be heated hotter and hotter.
Technical Data:
| MODEL | PT-NC-50 | PT-NC-60 |
| TUBE QUANTITY(PCS) | 50 | 60 |
| TUBE SPACING(mm) | 75 | 75 |
| TUBE DIAMETER/LENGTH(mm) | φ58/1800 | φ58/1800 |
| TUBE MATERIAL | HIGH BOROSILICATE GLASS 3.3 | HIGH BOROSILICATE GLASS 3.3 |
| TUBE INNER/OUTER WALL THICKNESS(mm) | 1.6/1.8 | 1.6/1.8 |
| MANIFOLD MATERIAL/WALL THICKNESS(mm) | SUS304/0.50 | SUS304/0.50 |
| JOINT PORT SPECIFICATION | 1″ | 1″ |
| THERMAL INSULATION MATERIAL/THICKNESS(mm) | POLYURETHANE FOAM/40 | POLYURETHANE FOAM/40 |
| COLLECTOR RATED PRESSURE(MPa) | 0.003 | 0.003 |
| COLLECTOR RUNNING TEMPERATURE Celsius | <100 | <100 |
| COLLECTOR VOLUME(L) | 145 | 175 |
| COLLECTOR ABSORB AREA(m2) | 4.8 | 5.8 |
| COLLECTOR TOTAL AREA(m2) | 7.72 | 8.24 |
| RECOMMENDED FLOW(L/min) | 5.76 | 6.96 |
| INTERCEPT EFFICIENCY η0 | 0.62 | 0.62 |
| HEAT LOSS COEFFICIENT a | 3.0 | 3.0 |
| COLLECTOR NET WEIGHT(kg) | 12.5 | 129.5 |
| HORIZONTAL INSTALLATION SIZE | ||
| ANGLE | 15° | 15° |
| a (mm) | 2060 | 2435 |
| b (mm) | 1974 | 2349 |
| c (mm) | 1860 | 2335 |
| d (mm) | 2023 | 2360 |
| e (mm) | 2200 | 2550 |
| f (mm) | 770 | 860 |
| G (mm) | 3715 | 3715 |
| H (mm) | 3560 | 3560 |
| H/2 (mm) | 1780 | 1780 |
FAQ:
Q1: Can I get any discount?
A1:
The Price is negotiable, we can offer you discount according to your order quantity. If you purchase it with container loading quantity, we can offer you some discount. For LCL goods, it needs extra wooden case fee.
Q2: How long will it take for my goods to receive?
A2:
Normally it need about 30 days to ship to European Countries and America by sea.
Q3: How much are the shipping costs?
A3:
Shipping cost is charged by the measurement and shipping port.
Q4: Do you offer samples for free?
A4:
Unfortunately we do not supply free samples.
Q5:How do I place my order?
A5:
You can send us an inquiry letter first, we will contact you in 24 hours and guide you how to order.
Q6: How to contact us?
A6:
Please send your Inquiry to our email or call us by tel/cell no.
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384
