|
Product Details:
|
| Model: | 10/15/20/25/30tubes | Insulation Layer: | 40mm |
|---|---|---|---|
| Frame: | Aluminum Alloy | Assembly: | Pitched Roof |
| Heat Pipe: | 14mm/24mm Condenser Copper | Manifold Color: | Silver/Black |
| Collector: | Heat Pipe | Structure: | Indirect Thermosiphon |
| High Light: | copper pipe pressurized solar collector,closed loop pressurized solar collector,EN-12975 Vacuum Tube Solar Collector |
||
heat pipe solar panel vacuum tube collector copper pipe solar collector closed loop collector pressurized solar panels
Advantage:
• Material of manifold is SUS304 stainless steel or aluminum alloy
• Copper heat pipe for rapid heat transfer.
• Max Pressure bearing: 8bar.
• ISO9001 / CE certificate/EN-12975.
• 5 years warranty.
• Corrosion resistant brazed copper header.
• Attractive design, standard frame suitable for pitched roof or flat roof .
• Easy plug-in installation.
• Improves the environment and save your fuel cost.
Heat pipe solar collector working principle
1) Solar absorption: solar radiation is absorbed by the solar tubes and converted into heat.
2) Solar heat transfer: heat pipes conduct the heat from within the solar tube up to the
header pipe.
3) Solar energy storage: water is circulated through the header, via intermittent pump cycling.
Each time the water circulates through the header, the temperature is raised by 5-10C.
Throughout the day, the water in the tank is gradually heated.
Key features
• Modular “plug ‘n’ play” design (Manifold, frame and tubes in separate packages)
• Lightweight manifold design
• Choice of Stainless Steel or Anodized Aluminum mounting frames
• Extremely reliable header design due to only 6 brazing joints
• Contoured header for turbulent flow even at low flow-rates
• All glass wool insulation for high temperature stability
• Patented heat transfer fin design for optimal heat transfer
• Long term stability under extreme conditions
• Extreme cold (freeze protected heat pipes)
• Coastal regions (salt spray)
• Harsh UV radiation (UV stabilized components)
• High Winds (up to category C cyclone)
• Snow loading
Technical datas:
| Model | PT-C-15 | PT-C-18 | PT-C-20 | PT-C-24 | PT-C-25 | PT-C-30 |
| Tube QTY(PCS) | 15 | 18 | 20 | 24 | 25 | 30 |
| Three Target Vacuum Tube | Diameter/Length: φ58mm/1800mm; High boron and silicon content 3.3; Structure:Gradual change SS-AL-Nx/Cu selective absorption coating; Vacuum Degree:P<=5*10-3; | |||||
| Heat Pipe | Condesor: φ14/φ24*70mm ; Thickness: 0.5mm ; Material: red copper TU1+water; Transfer Power:>=150W; Working Pressure:4Mpa; Welding Pressure:4Mpa; | |||||
| Outer Shell/Bracket | Alluminum Alloy,Silver | |||||
| Insulation Layer | Rock wool | |||||
| Dustproof Rubber | EPDM | |||||
| Dsily Heat Gain | 8.5MJ/m² | |||||
| Work Pressure | 0.6MPa | |||||
| Inlet/outlet | 22mm/3/4" | |||||
| Tailstock | ABS | |||||
| Temperature | 250 °С | |||||
| Contour Aperture Area | 2.32m² | 2.75m² | 3.10m² | 3.64m² | 3.78m² | 4.52m² |
| Aperture Area | 1.43m² | 1.70m² | 1.89m² | 2.27m² | 2.36m² | 2.83m² |
| Absorption Area | 1.22m² | 1.46m² | 1.62m² | 1.95m² | 2.04m² | 2.43m² |
Quality Policy:
products regular :≥99%
QC before output :100%
Replace free of the bed products:100%
Guarantee :5 years
We can also produce according to your requirement.And OEM is also provided.
Contact Person: Mr. Terry White
Tel: +86 135 1138 8384
